Air Cooler Oil Cooler On Waterjet Cutting Machine
Generally speaking, the air cooler/oil cooler has higher requirements for the use of waterjet machinery (high-speed fluid). The Chance air cooler experience is "three highs":
1. High-pressure system, whether it is an ultra-high pressure direct drive pump or an ultra-high pressure booster pump, the pressure rises above 2700-3000psi (about 207bar);
2. The frequency of commutation and the flow rate of return oil are higher than those of general hydraulic systems, and the impact is frequent;
3. The working environment is poor, especially the open frame, which requires a high degree of protection for the fan of the air cooler.
HD Series Air Oil Cooler specification
Exterior cooling area
L x H x W
Applicable motor power
Due to the significant advantages of air coolers, they are becoming more and more popular for use in waterjet machinery, but some customers have reported that they are prone to bursting and leaking during use, whether they are products of domestic and foreign merchants. Chance Hydraulic Oil Cooler has received a lot of calls for consulting solutions. Our engineers usually analyze the system operating conditions of the other party and give a reasonable rectification plan with minimal changes. If the imported air cooler bursts, HOBDAR will try to repair it. If it cannot be repaired, it will help redesign and manufacture it.
Therefore, if your product is exported to foreign markets, you must pay special attention to the risk of high-speed oil return shock when the hydraulic system's action instructions are wrong or the control element is damaged, which will directly affect the burst of the air cooler.
CHANCE is one of the most credible air cooler oil cooler on waterjet cutting machine manufacturers and suppliers in China. Welcome to buy air cooler oil cooler on waterjet cutting machine with reliable performance with our professional factory.