100Lpm Hydraulic Oil Cooler For Hydraulic Power Unit AH1012T
Hydraulic Oil Cooler is generally installed on the return line of the hydraulic system or on the overflow line of hydraulic relief valve.
The heat of the oil is due to a large amount of high-pressure oil flowing out of hydraulic relief valve. At this time, hydraulic oil cooler should be installed on the oil drain line of the relief valve. In this way, the temperature of the overheated oil is lowered before returning to the tank. After the oil cooler is installed, the pressure loss is generally 0.01～0.1MPa.
AH Series Hydraulic Fan Air Oil Cooler specification
Exterior cooling area
L x H x W
Applicable Motor Power
The output pressure of oil by the hydraulic pump enters the system directly, and the heated oil return along with the oil from the relief valve are cooled by oil cooler, and then returned to the oil tank. The check valve is used to protect the oil cooler. When the oil cooler is not needed, the check valve is opened to provide a passage.
CHANCE is one of the most credible 100lpm hydraulic oil cooler for hydraulic power unit ah1012t manufacturers and suppliers in China. Welcome to buy 100lpm hydraulic oil cooler for hydraulic power unit ah1012t with reliable performance with our professional factory.