Hydraulic Air Cooled Oil Cooler HD18140FB
Air Cooled Oil Cooler uses air as a cooling source, and the heat of the fluid is taken away by the fan to obtain a high-efficiency cooling effect.
Technical Data:
HDT Series Air Oil Cooler specification | ||||||||
HDT | Thread | Flow | Max. Pressure | Exterior cooling area | L x H x W | Weight | Cooling Power | IP |
G | L/Min | Mpa | ㎡ | m/m | kg | ▲T=30℃ | ||
HD18140FB | 1 1/2" | 480 | 2.0 | 23.2 | 622*499 | 50 | 35Kw(48Hp) | IP54 |
Features:
●Small size, light weight, easy to install;
●No need to connect cooling water, low cost to the user's total investment;
●Cooling effect is obvious;
●Using aluminum alloy heat exchanger technology in the automotive industry , through reliable brazing, to manufacture radiators in a variety of conditions.
●Air-cooled lubricating oil cooler motor protection class: IP55,
●Temperature control switch (optional), do not start cooling fan when oil temperature is low;
●Equipped with dust filter.
Application:
Hydraulic system, lubrication system,transmission system, power system
 Hydraulic Air Cooled Oil Cooler for Marine |  Hydraulic Air Cooled Oil Cooler for Wind Power |
Performance advantages:
Prevent the phenomenon that the oil temperature is too high and cause the seal ring to leak;
Preventing oil from deteriorating due to excessive oil temperature;
Improve oil lubrication efficiency and reduce mechanical maintenance rate.
Applicable medium:
Hydraulic oil, lubricating oil, water and water-soluble liquid, but not suitable for flammable, corrosive liquids.