Hydraulic oil cooler applied on waterjet cutter

Hydraulic oil cooler applied on waterjet cutter 




oil cooler for waterjet cutter

Oil Cooler for waterjet cutter


Hydraulic Oil Cooler applied on Waterjet Cutter

Hydraulic Oil Cooler applied on Waterjet Cutter


Equipment Data:

Hydraulic system main power: 37Kw,

Pump flow :80-120L / min,

Design pressure 400Mpa,

Maximum working environment temperature 36 ° C, environmental dust is heavy, requires continuous hydraulic oil temperature control within 50-60 ° C . The hydraulic system of this waterjet cutter is generally configured for water cooling. Considering that the water cooler tower is inconveniently configured by individual customer workshops, the water cooling tower is too far away from the working machine, and the cooling effect is not ideal. In order to meet customer requirements, we prefer to use the hydraulic air oil cooler to instead of it.

Chance Hydraulics provides a solution for the air oil cooler:  model AH2490A (heat dissipation area 31.1m2, air volume 12300m3/h at 60pa static pressure), fan power 1.1Kw, independent cooling. After the heat balance, the actual temperature rise is ≤20 °C, and the oil temperature is controlled below 50 °C for a long time. The effect is ideal.