Air Cooled Fan Oil Cooler HD18140T
Model HD18140T is an air-cooled oil cooler with a heat dissipation power of 35Kw. The core is made of a typical plate-fin aluminum alloy vacuum brazed. The design pressure is 20bar and test pressure is 35bar(3.5MPa) ). It is widely applied for gear oil, lubricantion equipment and other special fluid lubrication cooling. The same applies to fluids such as liquid oil and mineral oil that meets the DlN51524 standard.
HDT Series Air Oil Cooler specification
Exterior cooling area
L x H x W
The AC fan is equipped with an explosion-proof motor above IP55 and an integrated large-volume axial fan. Class F insulation level, CE certification mark, DC24/12V DC fan can be equipped if necessary. Two cooling methods, blowing and suction are available.
The maximum cooling power of HD18140T can reach 45kw. The heat dissipation area of the oil channel is 10 square meters, and the heat dissipation area of the air channel is 17.9 square meters. When the flow rate is 270L/min, the pressure drop is 0.15bar, which is 1.5 kgf.
General lubricating oil and thin oil lubricating pump stations for large-scale gearboxes can preferentially use air-cooled oil cooler HD18140T.
CHANCE is one of the most credible air cooled fan oil cooler hd18140t manufacturers and suppliers in China. Welcome to buy air cooled fan oil cooler hd18140t with reliable performance with our professional factory.